Compression Fitting Products
Ham-Let Fittings
Summary: Let-Lok double ferrule tubing fittings
Available in 1/16" through 2" and 2mm through 50mm tubing
NOTE: ALL COMPONENT PARTS ARE INTER-MIXABLE WITH SWAGE LOCK AND PARKER FITTINGS
Let-Lok single ferrule tubing fittings
Available in 1/16" through 1" tubing
UH Line Series - ultra vacuum systems
Available in 1/4" through 1" tubing
SAE 37 degree flare fittings
Available in 1/8" through 2" tubing
Pipe fittings/threaded
Available in 1/16" through 2"
ASME/ANSI b31.1 and B31.3 rated fittings
Tubing should comply with standard ASTM A213 or ASTM 269, be seamless and fully annealed
Tubing must be free of scratches and suitable for bending and flaring
Tubing hardness must not exceed Rockwell 90 HRB (200HV)
Ham-Let Process Valves
Summary: H500 Series - 3 piece ball valves - 3000 PSI (204 bar) - 1/4" - 2"
H700 Series - 2 piece ball valves - 2000 PSI (135 bar) - 1/4" - 1" or 6mm - 25mm
H800 Series - 1 piece ball valves - 3000 PSI (204 bar) - 1/16" - 1/2" or 3mm -12mm
H6800 Series - high performance ball valves - 6000 PSI (410 bar) 1/16" - 3/4" or 3mm - 18mm
H-300 Series - integral bonnet needle valves - 5000 PSI (345 bar) 1/8" - 3/4" or 3mm - 12mm
H99 Series - screwed bonnet needle valves - 10,000 PSI (690 bar) 1/4" - 3/4" or 6mm - 12mm
H98 Series - severe service screwed bonnet needle valves - 10,000 PSI (690 bar) 1/4" - 1" or 6mm - 25mm
Ham-Let Check & Relief Valves
Summary: American Stainless & Supply is proud to offer Ham-Let check & relief valves
H900 Series - relief valves - 10 to 225 PSI - 1/4" or 6"
H900HP Series - high pressure relief valves - up to 6000 PSI - 1/4" or 6mm
H400 Series - check valves - up to 6000 PSI - 1/8" through 1"
H911 Series - excess flow valves - 6000 PSI (413 bar) 1/4" - 1/2" or 6mm -12mm
H1200 Series - toggle valves - 300 PSI - 1/8" & 1/4"
H1300 Series - metering valves - 1000 PSI (69 bar) or 2000 PSI (138 bar) - 1/8" ,1/4". 3mm, 6mm
Ham-Let Pneumatic Actuators
Summary: Ham-Let Pneumatic Actuators (HPA) provide the answer to over sized valve actuators installed on smaller instrumentation that require extra support measures and in control panels and instrumentation applications. HPA is the most compact actuator of ball valves up to 1/2" body size. They have superior torque-to-size ratio for instrumentation valving applications. A unique internal and external double coating improves corrosion resistance and ensures smooth operation. A simple interface plate accommodates all air connection type. Four actuator types are available to best fit the entire Ham-Let ball valves range.
